
Radiant floor heating delivers silent, even warmth from the ground up — no drafts, no noise, no cold spots. We design and install hydronic systems built to last decades.
5.0 Rated
Verified
Radiant floor heating is one of those upgrades that sounds like a luxury until you experience it. Then it just feels like the obvious way to heat a home. Instead of blowing warm air around a room, radiant floor heating warms the floor surface itself, which then radiates heat upward evenly across the space.
The result is consistent, comfortable warmth at floor level — where you actually live — without the drafts, noise, and uneven temperatures that come with forced-air systems. If you're renovating, building an addition, or finishing a basement in Mississauga, this is the right time to consider it.

Hydronic radiant floor heating warms the floor surface from below by circulating warm water through PEX tubing embedded in the floor assembly. It works with a wide range of heat sources and applications.
PEX tubing is embedded directly in a concrete slab or thin-set layer before the floor surface is installed. Ideal for basements, new construction, and additions where the floor assembly is already being opened up.
Warm water circulates through tubing embedded in a concrete slab or thin-set layer. Better suited for whole-home heating, new construction, or major renovations. More involved to install, but more efficient for large areas and very cost-effective over time.
We install and design hydronic radiant floor heating systems for Mississauga homes — from single-room bathroom applications to complete whole-home hydronic systems.
The most popular starting point for Mississauga homeowners. A hydronic loop in the bathroom floor connected to your existing boiler or a dedicated heat source. Warm tile every morning — one of the most appreciated home upgrades we install.
Warm water circulates through tubing embedded in the floor assembly — either in a concrete slab or above the subfloor. The right choice for whole-home heating, large open areas, or new construction. Operates at lower temperatures than forced-air, with very even heat distribution.
Basements are one of the most common applications for radiant floor heating in Mississauga homes. Concrete slabs are naturally cold, and no amount of above-floor insulation fully addresses that. Radiant heat solves it at the source, making finished basements genuinely comfortable year-round.
For homeowners interested in whole-home hydronic heating — whether radiant floor, hydronic baseboard, or a combination — we design and install complete systems including the boiler or heat pump heat source, distribution manifolds, zone controls, and thermostats.


From initial assessment to final walkthrough, we manage the entire process and coordinate with your renovation timeline so everything integrates seamlessly.
We visit, review the space, discuss your goals and budget, and recommend the right system type. For hydronic systems, we calculate heating loads and design the tubing layout to ensure even heat distribution across the floor area.
For hydronic systems, we coordinate with your flooring contractor on timing — the tubing goes in before the floor surface does. We schedule our work to fit your renovation timeline and ensure there are no conflicts with other trades.
Hydronic tubing is installed and pressure-tested before any concrete or overlay is poured. Thermostats and zone controls are wired and programmed to ensure even, reliable heat distribution throughout the space.
We run the system through a full cycle before finishing work goes over it. Once floors are complete, we do a final test and walk you through the controls — how to set schedules, adjust zones, and get the most out of your system.
Clear, upfront quotes on every radiant floor project in Mississauga. We explain the full scope of work, material options, and costs before any work begins — no surprises.
Every system is installed to manufacturer specifications and pressure-tested before floors go over it. We don't cut corners on work that will be hidden under your flooring.
All gas and hydronic work is performed by TSSA-licensed technicians. We carry full liability insurance and meet every safety and building code requirement.
We don't just install tubing — we design the complete system, calculate heating loads, and coordinate with your renovation timeline so everything integrates properly.
As authorized contractors for leading HVAC manufacturers, we source and install only proven, high-efficiency equipment backed by manufacturer warranties.








Radiant floor heating is an investment that pays back over time through comfort and efficiency. We offer flexible financing through trusted lenders, including 0% interest for 12 months with approved credit. Most customers choose financing even when they could pay cash outright because it preserves their renovation budget.
Tile and stone are the best conductors and work beautifully with radiant systems. Engineered hardwood works well. Solid hardwood can work but requires careful temperature management. Luxury vinyl plank (LVP) is compatible with most systems. We assess your specific flooring choice during the design phase to ensure compatibility.
Hydronic systems tied to an efficient boiler or heat pump are very cost-effective for whole-home use — often more efficient than forced-air because they operate at lower temperatures and heat spaces more evenly. Because the system heats spaces more evenly at lower water temperatures, operating costs are typically lower than forced-air over the long term.
Hydronic whole-home systems can absolutely be a primary heat source and are designed for exactly that purpose. During the design phase, we'll be clear about what the system is suited for and whether it can stand alone or needs to work alongside another heat source.
A hydronic system for a basement or addition is part of a broader renovation timeline — the tubing goes in before the floor surface, so it needs to be coordinated with your contractor. A smaller single-room installation can typically be completed in one to two days. We'll give you a realistic schedule during the assessment visit.
Yes. We serve all of Mississauga including Port Credit, Streetsville, Meadowvale, Erin Mills, Clarkson, Lakeview, Malton, and surrounding neighbourhoods.
Most floor types are compatible. The main variables are thermal conductivity and maximum temperature tolerance of the material. We assess this as part of the design process and will tell you clearly if your planned flooring requires any special considerations.
Hydronic radiant systems work with a wide range of heat sources — high-efficiency condensing boilers, combination boilers, and heat pumps are all compatible. We'll assess your existing equipment and recommend the most efficient heat source for your system during the design phase.
Yes, though it's most cost-effective when floors are already being opened up for renovation. Retrofitting into an existing finished floor is possible but more involved. We'll assess your specific situation and give you an honest picture of what's feasible and what it will cost.
Contact Beyond HVAC today for a free, no-obligation quote on radiant floor heating in Mississauga. TSSA licensed, STO certified, and backed by up to 10-year warranties.